RSS Feed

Posts Tagged ‘bucket truck’

  1. Structural Tests – Bucket Truck Safety

    January 31, 2012 by utrucksales

    Visual Inspection: A whole inspection of accessible areas including:

    1. Outriggers Pads, structure, welds, bolts, hoses, cylinders, valves, hooks and retainers.
    2. Chassis Truck frame, aerial sub-frame, suspension, PTO, pintle hook, and facets of the brake, steering, electrical, air, hydraulic, exhaust, and cooling systems.
    3. Pedestal Items and welds, pedestal structure, diagonal brace, attachment welds or hooks, hydraulic swivel joint, hydraulic components, swing drive gearbox items, backlash between swing pinion or bullgear, electric collector ring and brushes reducing control operation.
    4. Rotation Bearing Upper and lower bearing attachment weld and bolts, vertical movement of bearing, and proper torque on accessible bearing bolts.
    5. Turntable Turntable structure, bucket advancing cables, advancing cylinders, having to pay chains or sprockets, and hydraulic system components.
    6. Lower Boom Boom structure, welds, lift cylinders and attachment, hydraulic system, advancing cables or rods, upper or extend cylinder and attachment, pushlinks, boom relaxation supports, tie-lower straps, lower insulator and mounting, extension curler setup and set on pads.
    7. Elbow Elbow structure, hydraulic hoses and advancing cables.
    8. Upper Boom (Extension) Structure, welds, advancing cables or rods, placed on pads, upper insulator and mounting, hydraulic lines and components, jib structure and mounting, tool circuit hoses and fittings, pole claw arms and supports.
    9. Platform (Bucket) Mounting bracket bolts, advancing system, exterior condition, control operation and hydraulic lines and components.
    10. Digger and Auger Digger mounting arm and housing, gearbox, auger, digger wind-up bracket or rope, auger stop bracket, lock mechanism and control operation.
    11. Winch Supports, bolts, hooks gearbox, hydraulic components, load line, and controls.
    12. General Load rating chart, electrical hazard placards, MADDDC placards and upper or lower control operation placards.

    The visual inspection includes removal of inspection cover plates as essential to carry out a thorough job.

    Acoustic Emission (AE) Test: AE might be the recognized industry method of testing abs plastic, fiberglass and steel structures. The AE test includes affixing sensitive sensors for the structural abs plastic, fiberglass and metal facets of the bucket lower for the outrigger or chassis subframe. An assessment load of a single-1/2 or 2 occasions the rated load (per customer) can be used for the boom. Your personal computer system monitors sounds launched by defects that are growing through the exam load. Laptop computer selects the critical noise contaminants and prints a summary report.

    Magnetic Particle Inspection: Magnetic particle can be a nondesctructive test method familiar with identify surface cracks on ferrous material. It’s perfromed on all critical welds, plates and castings of items listed simply B through the visual inspection.

    Dye Penetrant Inspection: Dye penetrant can be a nondestructive test method familiar with identify surface cracks and produces any structural surface including all critical welds, plates, castings produced from non-ferrous material and then for any area requiring verification simply C or Part E.

    Ultrasound Inspection: Ultrasonics can be a nondestructive test method familiar with identify defects in accessible critical hooks. Usage of ultrasonics reduces the quantity of hooks that needs to be removed for inspection. Hooks with flat finish surfaces and do not have drilled holes might be best suitable for ultrasonics.

    Torque Testing: Torque testing all critical nails in accessible areas including upper and lower rotation bearing, swing gearbox, boom connections, and platform mounting.


  2. I-80 Equipment uses Line-X on every Bucket Truck We Sell

    January 29, 2012 by utrucksales

    You recognize you’ve a durable protective coating in your bucket truck if the StormChasers apply it to their Tornado Chasing Dominator Car Check this video out from the new SEMA Show or watch them at the Discovery Channel. http://dsc.discovery.com/tv/storm-chasers/ Posts On the topic of I-80 Equipment uses Line-X on every Bucket Truck We SellNew Video from [...]


  3. Bucket Truck Of The Week September 30

    December 18, 2011 by utrucksales

    Bucket Truck Of The Week  September 30

    Versalift Bucket Truck Picture

     

    Occasionally, we update our blog with our available inventory of bucket trucks and digger trucks. It’s been some time since we’ve done this, so today we decided to select it up again. You can begin checking weekly to determine our newest featured utility bucket truck for the week. We are hoping this can allow you to to look more of our available stock.

    Versalift Bucket Truck For Sale

    Yep, you heard right. The utility bucket truck within the picture above is on the market and able to go. It’s a 2007 Ford F550 with a Versalift auger stretching forty-five feet. The bucket truck is in great condition because it have been reconditioned from the interior out. Every aspect from the glove box to the generator have been considered. We don’t leave scratches or torn fabric inside your truck, we all know you need to be comfortable driving it around. Some companies gets a truck in, slap on some paint [without even washing the truck first], and contact it an afternoon. We don’t stop the work until it looks and runs like new. With our equipment, you are able to trust you won’t get snuffed.

    Details Are:
    Truck: 2007 Ford F550
    VIN: 1FDAF56P67EA91434
    Engine: 6.0L Diesel
    Transmission: Auto
    Brakes: Hyd.
    Mileage: 77,431
    GVW: 19,000 Lb.
    Tires: 225/70R19R19.5
    Equipment: Versalift Bucket Truck
    Model: VO40MHI
    Serial #: FK07006
    M/H Capacity: 1,100 Lbs.
    Working Height: 45′

    Call today when you have any questions on this used utility auger truck. We’re sure you’ll need to know the cost and the way it’s been reconditioned by our expert re-conditioners. We’re anxious to serve you, so hurry up and speak to or stop by! It’s also possible to email us or connect via social media during the trucks at the right side of the page. We are hoping to determine you soon!


  4. Bucket Truck of the Week: 2000 Ford Hi-Ranger Bucket Truck

    December 14, 2011 by utrucksales

    It’s that point again. This week, we’re featuring a model year 2000, Ford Hi-Ranger, Bucket Truck with ’42 inch lift. This truck is able to be rented or sold! Because it comes from us, you’ll be sure the standard is the best you’ll find within the industry! Check the below truck out today!

    Bucket Truck of the Week: 2000 Ford Hi-Ranger Bucket Truck

    Our weekly featured bucket truck for sale

    Looking good! To view more information about this bucket truck , visit the link and do a seek stock number 1090. You may as well view the remainder of our bucket truck inventory to boot. Below, you’ll find tools to bookmark us. We are hoping you’ll accomplish that and return often to read our regularly updated blog and articles directory. We are wanting to provide the proper knowledge and data regarding bucket trucks. We are hoping you’ll find our provided information useful. Share it along with your friends and fix with us on Twitter, LinkedIn and Facebook!


  5. What’s a Bucket Truck?

    December 13, 2011 by utrucksales

    Whats a Bucket Truck?

    Hino Bucket Truck

    A bucket truck is one of those mobile, aerial work platform that includes an aerial device mounted to a truck (a motorized vehicle designed to move cargo).  Often times the aerial device is mounted onto a van, and is then called a bucket van.  The aerial device contains a fiberglass or steel platform (bucket) secured to a hydraulic or electric lifting system, consisting of the lifting arm(s) (boom), and a rotating turret.  The system is designed to soundly lift personnel into the air to accomplish work.  Some bucket trucks also are equipped with a cloth handling winch designed to boost materials and supplies.


  6. Utility Fleet Acquisition Featured on Trailer-BodyBuilders.com

    December 12, 2011 by utrucksales

    Utility Fleet Acquisition Featured on Trailer-BodyBuilders.com

    Utility Fleet Sales of Texas Acquires Missouri Bucket Truck Dealer.

    Read complete Press Release at:  http://trailer-bodybuilders.com/chassis/utility-fleet-sales-missouri-bucket-0913/


  7. Aerial Bucket Truck Workers & Storms

    November 10, 2011 by utrucksales


    When storms strike, people are cautioned to remain inside their homes for safety reasons. While most people are safe inside their homes, other brave workers are out in the dangerous weather, doing the job they were trained to do with an aerial bucket truck; they are immediately able to counter the damage caused by ravaging weather occurrences. These courageous workers are always ready for emergency situations, especially during the storm season, so that local residents affected by strong weather are able to remain safely inside their homes, assured by the knowledge that any power outage will soon be restored. In addition, rescue workers or volunteers remain in the affected area to help those who may need emergency services and brave the many hazards that the storm created and any dangers it may still be creating.


    Aerial Bucket Truck – Workers Full Time Partner

    The industries that are most affected after a storm are the electric and telecommunication services. Downed transmission and telecommunication lines, uprooted and broken utility poles and severed utility wires are the most common scenarios during and after severe weather. The services of these two industries are important to everyone; however, for some people the loss of these services due to a severe storm could put their lives at risk. This is the reason why the restoration of these utilities is extremely important in any area that is recovering from severe storm damage and restoring utility service should have the highest priority by utility service personnel. In order to restore connections as quickly as possible, utility workers must utilize aerial bucket trucks so the repairs can be done promptly. It would be extremely difficult to restore power and telecommunication service to an affected area without the use of this versatile vehicle; therefore, these workers make it their full-time partner.

    Restoration

    When severe weather causes vast destruction to the area it has hit, there is a higher possibility of injuries to the workers restoring damaged power lines. One very dangerous and deadly injury is electrocution; however, through the use of aerial bucket trucks, the risk for this injury is kept to a minimum. The three main benefits of using a bucket truck to repair damaged power lines are safety, maneuverability, and adaptability.

    Safety – Electrocution has been clearly identified as a problem that is commonly associated with the repair of power lines after a storm. This is primarily due to the possibility of the presence of live electrical wires in the affected area. For this reason, linemen who are sent to repair the damaged power lines use a bucket truck equipped with high insulating material to protect them from electrical shock in the event the knuckle boom accidentally touches the live wires. In addition, when working close to electric lines, the vehicle must be grounded to heighten the degree of protection.

    Flexibility – When the storm season arrives, utility service personnel travel back and forth to various severe weather-prone areas. They make important assessments both before and after a disaster strikes. Since frequent transportation is required for these workers, it is imperative to deploy a flexible and maneuverable piece of equipment that is able to counter the impact of a sudden storm. The bucket truck is made of high tensile steel, can travel on various terrains, and is able to travel at good road speeds in order to reach the damaged area in the shortest possible time.

    Adaptability – Other than transmission and electric power lines, there are many other things this vehicle can do to aid in the recovery such as broken transformers, street lights, signs, and branches. For any aerial activities that must be performed in the aftermath, this versatile vehicle can be an all-around, heavy-duty machine, capable of any post-storm restoration.

    It is important to remember that during the storm season, many brave workers risk their lives to respond to such an emergency. Utility workers provide the emergency rescue necessary for the recovery of the storm-stricken area and the bucket truck allows this work to be done much more rapidly. The safety, flexibility, and adaptability of this powerful machine helps the workers brave the storms!

    Click here to find out more about Aerial Bucket Trucks.


  8. Aerial bucket truck safety

    November 10, 2011 by utrucksales


    It’s difficult to imagine how aerial bucket trucks are able to move their booms and lift heavy loads. Basically, this bucket truck gets its lifting capability from a powerful diesel engine. The power is converted to lift heavy loads via the hydraulic system. The amazing thing about this accomplishment is that the medium for transmitting all that power is simply a viscous liquid called hydraulic fluid.

    Today, the bucket truck has progressed to become a safe piece of equipment with plenty of failsafe mechanisms to protect the employee working inside the bucket should this lifting method ever fail. One component that keeps the bucket truck safe is the integral holding valve that is built in to the cylinder. Its purpose is to hold the boom in position if a failure occurs between the cylinder and the directional valve.

    Structure Vulnerable to Breakdowns

    Despite these fail-safe features, the structure is still vulnerable to breakdowns. One of the most common causes is pollution. As a matter of fact, 75% of all hydraulic failures are caused by dirt inside the mechanism, and only 25% is due to pure mechanical failure.

    Supposedly, the device is free from any foreign material for optimum service life; however, sometimes during production or between servicing, debris such as iron filings, sand, excess sealant, dust and chipped paint can contaminate it.

    Effect of Foreign Debris

    Foreign debris can contaminate different parts during production if the production area isn’t clean and well ventilated. Dust particles can easily enter the orifices of the hydraulic parts and contaminate the system. The same problem can occur when it is serviced by non-specialized technicians. Bad repair practices can easily introduce foreign debris into the apparatus.

    Despite their size, pollutants can easily damage different parts of the hydraulic system and compromise its safety. Small paint fragments or metal shavings can potentially block fluid inlets restricting or reducing the flow or totally blocking the movement of the fluid.

    Even microscopic debris can have a detrimental effect on the hydraulic system. Specks of dust and other small solid fragments can wear out oil seals causing leaks and releasing pressure from the structure. Solid pollutants can also get in-between moving parts and restrict their movement. The added friction could also speed up the part’s wear and tear resulting in the necessity of service much sooner.

    Lack of Proper Servicing

    Aside from foreign debris, another cause of system pollution is the lack of regular servicing. Hydraulic fluids should be changed regularly as prescribed by the truck manufacturer. Fluids will change property over time due to factors such as heat and pressure as well as the addition of shavings from the structure’s moving parts during normal operation. The changes in the fluid’s viscosity, as well as the accumulation of dirt, can also affect the system’s performance.

    Pollution inside the system can potentially reduce the lifts upward ascent capability, be the cause of a slowed response, or worse yet, totally fail during operation.

    Use Manufacturer’s Replacement Parts

    To prevent hydraulic system pollution, it is important to purchase aerial bucket trucks with brand names from well-known and established manufacturers. Servicing should also be performed only by authorized technicians. Whenever parts replacement is required such as the hydraulic oil filter system, only use replacement parts recommended by the truck manufacturer.

    Lastly, follow the truck’s regular maintenance schedule. If these guidelines are followed, the breakdown of any part of an aerial bucket truck due to hydraulic system failure caused by pollution into the system should not happen!


  9. New Bucket Trucks Classifieds Website

    October 2, 2011 by utrucksales

    If you’ve been browsing the internet trying to find a deal on bucket trucks, chances are you’ve become frustrated with your selection and the amount of information. Let’s face it, buying a bucket truck on the internet is a pain in the ass. UTruckSales.com is going to change all of that.

    UTruckSales.com makes sure all equipment listings show detailed and important information including several images. We also make it easy for you to visit the dealer’s website and contact the seller.

    Expect the best from a classified site and don’t settle for a bad picture and limited information. Make your next utility truck purchase from one of the trusted dealers on UTruckSales.com. We make sure all sellers are established and reliable. You won’t have to worry about scam artists, junkers, or anything less than as advertised.

    Don’t waste time looking for used bucket trucks for sale. Contact the dealers on UTruckSales.com today.

    bucket trucks for sale - classifieds